CAM's CT Harness Taping Machine has undergone a modernization.  Like with our coil taping equipment the development of industrial servo drives has greatly improved the operation of our harness taping machines.  In the past the choice was clutch driven continuous running motors or the old noisy DC motors.  The new systems use high torque servos which are extremely quiet and have excellent low speed torque giving unmatched control during operation. 
 
New motor with:

• Self-contained quiet servo drive with brake. 
  • Full range speed control, foot treadle operated.
  • Adjustable maximum speed limit rotary switch.
  • Reversing switch to change tape ring rotation.
  • Integrated plug socket for work light or chargers
  • Quieter running low vibration link belt to head.

 
Tape head features:

• Long lasting cast iron tape ring with oiled bronze center bearing.
• Moly impregnated plastic thrust bearing for quieter quite operation. 
• Extended harness support with duel direction tape slot.
• Aluminum belt guard.     

 
Table and base features:

• Industrial table design with adjustable height top. 
  • Industrial foot treadle design, fully adjustable for foot angle/ location to reduce leg strain.    
  • Longer 48” laminate covered plywood work top. 
  • 2 Steel top supports.

 

Spiral Taping Machines For Harnesses

CAM's custom taping machines and dispensers are used in a wide range of industrial applications to insulate, protect, bind and wrap wire harnesses, electric coils, buss bars, plastic tubing and much more. Our taping systems apply polyimide, vinyl, foil, glass, mica, epoxy film, polyester, woven paper, reinforced filament, fluorocarbon film composites and other materials.

CT Manual Spiral Taping Machine

Fast, Variable Speed, Easy to Use and Ergonomically Safe

The CT Spiral Taping Machine wraps adhesive and non-adhesive tapes on wire harnesses, cables, degaussing coils, pipes and similar work pieces. There are two standard CT models; one for taping bundle diameters up to 3/8" (9.5 mm), and the other for bundle diameters ranging from 1/4" (6.4 mm) to 1" (25 mm).

The machine's taping head is mounted on top of a worktable with the variable speed drive components below the table. A foot switch controls the taping head at speeds up to 600 rpm. Designed to be simple to operate and ergonomically friendly, it eliminates many of the repetitive wrist motions associated with manually wrapping tape around an object.

With a CT Taping Machine, the operator pulls the harness through the taping head while controlling the speed of the tape head with the foot switch. The amount of tape overlap depends on how fast the harness is moved through the head by the operator.

Design Features
• Variable Speed Tape Head Drive at 600 RPM with a 3/4” (19.05 mm) wide tape at 1/2 tape overlap the maximum taping speed is
​3 in (76.20 mm)/sec. 
• Foot pedal control - easily adjusts speed for maximum productivity. 
• Can apply vinyl tape and other adhesive and nonadhesive tapes. 
• Wire Harness table supports the harness and minimizes tape wrinkles. 
• Robustly constructed to last and last. 
• Complete machine assembly includes: taping head, table, motor, foot pedal and controls. 

RHT Semi-Automatic Taping Machine

Fast Spiral Taping with Programmable Overlap Control.  Perfect Overlap Everytime.

RHT is a semi-automatic taping machine designed to spirally wrap tape on harnesses, cables, tubing, pipe and buss bars.

Simple to use, CAM's RHT Taping Machine combines the precision of automatically controlled overlap with the flexibility to apply one or two layers of any type of tape.

Two Roll Tape Head -- saves time -- doubles productivity!
Adhesive and non adhesive tapes with widths up to 1½ inches can be applied with total accuracy by an RHT machine at tape speeds of up to 14 feet per minute. For even greater productivity, our Dual Head RHT model enables you to apply two layers of tape in a single pass, or a layer of foil and a covering layer of tape simultaneously. 

​Push Button Overlap Control
Use the ratio controller to set the overlap and the RHT automatically maintains perfect overlap at any speed. Fast or slow, the tape head turns in time with the powered drive rollers, wrapping the harness with measured precision while pulling the harness through the machine.

Sweep Breakouts Through Without Opening the Guard!
CAM's self-aligning, slotted tape head combined with the exclusive Sweep-Thru Guard makes taping harnesses with multiple wire breakouts simple. Breakout wires are easily pulled through the special safety guard without opening the guard or threading the harness through the tape head. It's fast and easy!

Ready to go in just seconds
It takes just seconds to open the guard and change a tape roll, a few more seconds to place your harness through the tape head and engage the pneumatic pressure drive rollers. Then, close the guard and step on the pedal and start taping.
​It really is that simple.
​

HARNESSES: RHT & CT Spec Sheet